The TH type circular chain bucket elevator adopts a mixed or gravity unloading method and a pull-out loading method. The TH type circular chain bucket elevator is mainly suitable for conveying loose density less than 1.5t/m ³ Low grinding materials that are easy to extract, such as coal, cement, crushed stone, sand, fertilizers, grains, etc. The temperature of the transported material shall not exceed 250 ℃. The TH type circular chain bucket elevator has significant advantages such as large conveying capacity, high lifting height, stable and reliable operation, and long service life. Its main performance and parameters comply with the standard of JB3926-82 "Vertical Bucket Elevator".
1. Large conveying capacity: Compared with the HL type, the TH type with the same bucket width has a nearly double increase in conveying capacity;
2. Assembled sprocket is used. It is formed by connecting the wheel body and rim with high-strength bolts. After the sprocket is worn to a certain extent, the bolts can be unscrewed and the rim can be replaced, making replacement convenient and reducing maintenance costs;
3. The lower part adopts a heavy hammer lever type tensioning device, which can achieve automatic tensioning. After installation, there is no need to adjust and a constant tension can be maintained, ensuring the normal operation of the machine and avoiding slipping or chain detachment;
4. The traction component is a low alloy high-strength circular chain, which, after appropriate heat treatment, has high tensile strength and wear resistance, and a long service life.
The TH type chain bucket elevator is used for mixed or gravity unloading, and for pull-out loading, suitable for conveying loose density less than 1.5t/m ³ And the temperature of powder, granular, and small pieces of low grinding materials that are easy to extract shall not exceed 250 ℃.
Easy maintenance and long service life. The casing steel plate is thickened and has good rigidity.
The maximum temperature for conveying materials can reach 250 ℃. Stable and reliable operation, low noise, and convenient maintenance when lifting the height.
The mid section casing has two forms: single channel and dual channel. The improved model increases the conveying capacity by more than 30% compared to ordinary models.
The hoist is forged with low alloy steel and has undergone carburizing and quenching treatment, which has extremely high tensile strength and wear resistance.
|Conveying capacity (100%) m³/hour
|Hopper spacing mm
||Round steel diameter * pitch mm
|Single breaking load
|Transmission sprocket speed r/min
|Maximum block size of transported material mm